What Is InnoTrap™ Smart Sensor Trap?
InnoTrap™ is Innovative Pest Management's sensor-driven, mechanically triggered rodent capture system. Each unit contains a wireless sensor that registers the exact moment a rodent enters and is captured — then pushes a timestamped alert to our service team. No rodenticide. No mystery captures. No unverified logs.
Unlike glue boards, snap traps or poison bait stations, InnoTrap™ contains no rodenticide. Rodents do not die behind walls or contaminate stored food. Because every trap is sensor-equipped, you never rely on a technician's word or a paper checklist.
How an InnoTrap™ Deployment Works
From site assessment to first capture alert, an InnoTrap™ deployment follows a structured four-step process designed to position traps where rodent activity is highest and document every event.
Site Assessment & Risk Mapping
Technician walks the premises, identifies rodent entry points, runs and harbourage zones (kitchen voids, riser shafts, ceiling spaces, bin areas) and confirms ideal trap positions.
Trap Placement & Sensor Pairing
InnoTrap™ units are installed at each identified zone, baited with food-grade attractant only (no rodenticide), and the wireless sensor is paired to the property's trap log. Each unit is numbered and mapped.
Capture Event & Real-Time Alert
When a rodent enters and triggers the unit, the sensor fires, the capture is registered, and an alert is pushed to the Innovative service team within 2 hours including unit ID and timestamp.
Service Visit & Audit Log Entry
Technician attends the site, removes the captured rodent hygienically, resets the trap and updates the digital trap log. The event is retrievable on demand for SFA / HACCP / MCST audit purposes.
Where InnoTrap™ Is Deployed
InnoTrap™ is the preferred rodent solution for any premises where poison bait cannot be used, where audit logs are mandatory, or where dead-rodent odours behind walls would be unacceptable.
Restaurants, cafes, central kitchens and food production facilities cannot use rodenticide near food contact zones. InnoTrap™ provides a fully poison-free capture system with a date-stamped digital log for every event.
- Poison-free, food-safe
- Digital audit log per trap unit
- No bait shedding near food contact zones
- Pairs with InnoSight™ for kitchen-wide monitoring
Hospitals, clinics, dental practices and medical centres require rodent control that does not introduce poison residues into patient environments. InnoTrap™ sits discreetly in service voids and back-of-house areas with full event logging.
- Zero rodenticide near patient zones
- Discreet placement in service voids
- Digital log for facility audit
- Compatible with infection-control protocols
Pre-schools, primary schools, childcare centres and student hostels need rodent monitoring without any risk of accidental exposure to children or staff. InnoTrap™ is fully sealed, contains no poison and triggers an alert the moment a unit fires.
- No exposed bait or rodenticide
- Sealed mechanical capture
- Real-time alert to facilities team
- Auditable log for MOE / ECDA compliance
Office buildings, retail malls and commercial complexes increasingly demand pest control solutions that respect tenant safety, ESG reporting and building management standards. InnoTrap™ provides quiet, sensor-driven capture without odour issues.
- No dead-rodent odours behind walls
- ESG-friendly, no rodenticide release
- Centralised digital trap log per floor
- Service visits scheduled on trigger only
Bungalows, semi-detached houses and condominiums with pets cannot risk poison bait exposure. InnoTrap™ delivers professional-grade rodent capture with no risk to family pets and a clean activity log accessible to the homeowner on request.
- Pet-safe, no secondary poisoning risk
- Discreet placement in roof voids and service ducts
- Owner-accessible activity log
- Pairs with InnoSight™ for full property monitoring
Warehouses, cold-store facilities and logistics hubs face rodent risk along loading bays and racking. InnoTrap™ is positioned at perimeter and racking junctions, capturing rodents without contaminating stored goods or palletised inventory.
- No rodenticide near stored goods
- Unit-by-unit digital log per zone
- Perimeter and racking placement
- Audit-ready for client compliance reviews
InnoTrap™ vs Traditional Rodent Methods
Why sensor-driven capture outperforms glue boards, snap traps and poison bait for any premises that needs verifiable, audit-ready rodent control.
InnoTrap™ Is One Module of Innovative SmartIPM™
SmartIPM™ is Innovative Pest Management's integrated technology platform — seven detection, monitoring and treatment modules working as a single audit-ready system. InnoTrap™ handles capture; InnoSight™ handles AI rodent monitoring; InnoScan™ handles thermal detection; InnoHeat™ handles bed bug treatment; and Xterm™ handles termite baiting.
Explore the full SmartIPM™ platformInnoTrap™ + InnoSight™
The Closed-Loop Rodent Control System
Most rodent control guesses where activity is. The SmartIPM™ rodent stack knows — because InnoSight™ maps movement first, then InnoTrap™ captures at the exact hotspot. Every event is logged and proven.
AI cameras identify rodent movement paths, peak activity times and harbourage zones
Sensor-triggered units placed at the exact hotspots InnoSight™ identified
Trigger event pushed to the Innovative team within 2 hours — unit ID, timestamp, zone
Every capture logged, dated and retrievable — verified proof, not paper checklists
InnoTrap™ Managed Service.
Trigger-Based Visits Included.
An annual managed service designed for premises that demand verifiable, audit-ready rodent control without recurring weekly walk-throughs.
Technician dispatched within 24 hours of any sensor trigger to remove the captured rodent, sanitise the unit and reset the trap. No fixed weekly visits — visits happen only when needed.
Every quarter, a technician walks the full premises, checks trap positions, reviews captured-event patterns and adjusts trap placement to follow the data.
Continuous digital log of every trap event, retrievable on demand for SFA, HACCP, MOE, ECDA, MCST and ISO compliance audits. No paper checklists.
Common Questions About InnoTrap™ Smart Sensor Trap
Answers for F&B operators, facility managers, MCST councils, schools and residential clients evaluating Innovative Pest Management's smart rodent capture system.
InnoTrap™ is a sensor-equipped, mechanically triggered rodent capture unit developed by Innovative Pest Management. Unlike a traditional snap trap or glue board, every InnoTrap™ contains a wireless sensor that registers the exact moment a rodent is caught. The capture event is timestamped and pushed to our service team within two hours, so the unit never sits unattended for days. There is no rodenticide inside the unit — only a food-grade attractant — which means zero secondary poisoning risk for pets, wildlife or children.
Yes. InnoTrap™ was designed specifically for F&B kitchens, central kitchens, food production and SFA-audited premises. The unit contains no rodenticide, so it can sit close to food contact zones without breaching SFA requirements. Every trigger event is logged digitally with date and time stamps, giving SFA inspectors and HACCP auditors a complete activity history per trap unit on the property.
No. InnoTrap™ contains zero rodenticide. The unit relies on a food-grade attractant to draw the rodent into the mechanical capture mechanism. This means no secondary poisoning of cats, dogs, owls or non-target wildlife, no risk of accidental ingestion by children, and no rodents dying behind walls or above ceilings where they would decompose and release odour.
The wireless sensor inside each InnoTrap™ unit pushes a trigger event to the Innovative service team within two hours of capture, day or night. This includes the unit ID and timestamp. Our technician is then dispatched within 24 hours to remove the captured rodent hygienically, sanitise the unit and reset the trap.
Yes. Every trigger event is recorded against the trap unit ID, date, time and zone in the property's digital trap log. The log is retrievable on demand and is suitable for SFA inspections, HACCP audits, MOE / ECDA reviews for schools and childcare, MCST council reporting and ISO compliance documentation.
Yes. Because InnoTrap™ contains no rodenticide and the capture mechanism is fully sealed inside the unit, there is no risk of pets or children making contact with the capture mechanism, no risk of poison ingestion and no risk of secondary poisoning if a pet were to eat a captured rodent.
InnoSight™ is Innovative's AI-camera monitoring system that maps where rodents travel on the premises. InnoTrap™ is the capture device positioned at the high-activity zones identified by InnoSight™. Together, the two modules form a closed loop: InnoSight™ identifies where rodents move, InnoTrap™ captures them at those exact points, and the digital log proves the activity has been controlled. Both modules are part of the SmartIPM™ platform.
Typical deployment ranges from 2 to 4 units for a landed home, 6 to 12 units for an F&B kitchen or restaurant, 12 to 30 units for a central kitchen or warehouse, and case-by-case sizing for hospitals, schools and large commercial buildings. Final placement is decided after a site survey by an Innovative technician.
Innovative Pest Management targets a site survey within 24 to 48 hours of enquiry, with full InnoTrap™ deployment typically completed within 5 working days of survey approval. Urgent SFA-driven cases for F&B premises facing imminent inspection can usually be expedited. Contact us via the form on this page, by phone at +65 6909 0988 or on WhatsApp for a same-day response.