What Is InnoTermite™?
InnoTermite™ is Innovative Pest Management's complete termite colony elimination programme. It is not a single treatment or a bait product — it is a structured, four-stage system that begins with locating the colony, proceeds through scientifically proven baiting, monitors until the queen and colony are confirmed dead, and then protects your property for nine months with a documented warranty.
Most termite treatments either apply liquid chemical barriers that block movement without killing the colony, or deploy bait without first confirming where the colony actually is. InnoTermite™ starts with InnoScan™ thermal imaging to map the colony location before a single station goes in — making every treatment decision data-driven.
The baiting technology at the core of the programme is Xterm™ by BASF — a species-specific insect growth regulator bait that workers carry back to the colony, disrupting the queen's reproductive cycle until the entire colony collapses. InnoTermite™ is the programme. Xterm™ is one of the tools inside it.
Coptotermes gestroi
Singapore's Most Destructive Termite
Approximately 70–80% of all termite infestations in Singapore involve Coptotermes gestroi — a subterranean species that builds its nest underground and sends foraging workers through soil and structural timber in search of cellulose.
Chemical Barriers Block.
InnoTermite™ Eliminates.
Traditional termite treatments flood the soil around a structure with liquid termiticide, creating a chemical barrier that repels or kills foragers on contact. The problem: the colony itself survives. When the barrier degrades (typically 5–8 years), or when workers find a gap, infestation resumes.
InnoTermite™ uses Xterm™ bait — a slow-acting insect growth regulator that workers collect and carry back to the colony through trophallaxis (food sharing). The IGR disrupts moulting at every stage. Workers, soldiers, nymphs and the queen all stop reproducing. Within weeks to months, the colony collapses entirely. The source is removed, not just blocked.
InnoTermite™ 4-Stage Programme
From the first inspection to the 9-month post-eradication check, every stage is documented, verified and covered under Innovative Pest Management's written warranty.
InnoTermite™ vs Chemical Barrier
vs DIY Termite Products
Innovative Pest Management offers both programmes. Here is how to choose the right solution for your property and situation.
| Criteria | Colony Elimination InnoTermite™ by Innovative | Perimeter Protection Chemical Barrier by Innovative | DIY Products |
|---|---|---|---|
| Best suited for | Active infestations | Prevention & new builds | Not recommended |
| Colony source eliminated | Yes — queen dies | Foragers blocked at perimeter | No |
| Detection technology | InnoScan™ thermal imaging | Full site inspection | None |
| Long-term residual protection | 9-month post-eradication warranty | Up to 8 years residual barrier | None |
| Drilling or soil injection | None required | Perimeter soil treatment | Varies |
| NEA-licensed professional service | Yes — Innovative Pest | Yes — Innovative Pest | No professional oversight |
Not sure which programme is right for your property? Innovative Pest Management offers both InnoTermite™ and Chemical Barrier treatments. Our NEA-licensed technician will assess your situation and recommend the appropriate solution — or a combination of both for maximum protection.
InnoTermite™ Is One Module of Innovative SmartIPM™
Innovative SmartIPM™ is Innovative Pest Management's integrated technology platform — seven smart tools that work together to deliver continuous, data-driven pest protection. InnoTermite™ is the termite elimination layer, working alongside InnoScan™ for detection, InnoSight™ for rodent monitoring and InnoFly™ for flying insect control.
Common Questions About InnoTermite™
Answers written for homeowners, property managers and facility teams evaluating termite control options in Singapore.
What is InnoTermite™ and how is it different from standard termite treatment?⌄
InnoTermite™ is Innovative Pest Management's structured 4-stage termite colony elimination programme. Unlike a standard chemical barrier treatment, which suppresses termite movement without eliminating the colony itself, InnoTermite™ uses Xterm™ bait technology to reach the queen and collapse the entire colony from the inside. It begins with InnoScan™ thermal imaging to locate the colony before any treatment is applied, ensuring every bait station is placed at a confirmed activity zone rather than estimated positioning.
What termite species does InnoTermite™ treat?⌄
InnoTermite™ is optimised for Coptotermes gestroi, the subterranean termite species responsible for approximately 70 to 80% of all termite infestations in Singapore. Coptotermes gestroi builds its primary nest underground and sends foraging workers through soil and timber in search of cellulose. The Xterm™ bait stations intercept this foraging behaviour and introduce IGR bait into the colony's food-sharing network. The programme is also effective against other subterranean termite species found in Singapore.
How does Xterm™ bait actually eliminate the termite colony?⌄
Xterm™ contains an insect growth regulator (IGR) that interferes with the moulting process termites need to develop and reproduce. Worker termites collect the bait and distribute it through the colony via trophallaxis, a direct food-sharing behaviour where workers feed one another mouth-to-mouth. This spreads the IGR to soldiers, nymphs and ultimately the queen. Because the bait is slow-acting, workers do not associate it with harm and continue sharing it. Over weeks to months, the colony cannot sustain reproduction and collapses entirely. The queen is eliminated, and no new workers are produced.
Does InnoTermite™ require drilling into my walls or floors?⌄
No. InnoTermite™ does not require drilling into walls, floors or soil injection points. Stage 1 uses InnoScan™ thermal imaging, which reads through surfaces without contact. Stage 2 positions Xterm™ bait stations at floor level or in ground-level placements at activity zones. There is no liquid barrier injection, no chemical flooding of the soil and no surface damage at any stage of the programme. This makes InnoTermite™ particularly suitable for conservation properties, tiled floors, heritage buildings and premises where drilling is not permitted.
How long does the InnoTermite™ programme take?⌄
Colony elimination through baiting typically takes 6 to 12 weeks from bait station installation to confirmed collapse, depending on colony size, species, temperature and bait uptake rate. Coptotermes gestroi colonies in Singapore's climate tend to respond faster than colonies in temperate regions due to continuous activity year-round. After colony elimination is confirmed, the 9-month post-eradication monitoring and warranty period begins. The full InnoTermite™ programme, including warranty, therefore covers approximately 11 to 13 months from first inspection.
Is InnoTermite™ safe for children, pets and food preparation areas?⌄
Yes. Xterm™ bait is species-specific, meaning the IGR compound targets the termite moulting process and does not affect mammalian biology. Bait stations are enclosed units, the bait material is contained within the station and not accessible to children or pets. No fumigation, no spraying and no airborne chemical dispersal occurs during any stage of the InnoTermite™ programme. The treatment is suitable for deployment in F&B premises, childcare centres, hospitals and residential properties.
What does the 9-month post-eradication warranty cover?⌄
The InnoTermite™ 9-month post-eradication warranty covers the same property against renewed termite activity at the treated zones. If active termites are detected at the monitored property during the warranty period, Innovative Pest Management will return and conduct additional treatment at no extra cost. The warranty is documented in writing at contract completion and includes the specific coverage period, monitored zones and Innovative's response commitment. Bait stations remain active as monitoring points throughout the warranty period.
Can InnoTermite™ treat an active infestation, or is it only for prevention?⌄
InnoTermite™ is designed for both active infestations and prevention. For active infestations, the thermal detection at Stage 1 confirms colony location and the bait stations at Stage 2 are positioned for immediate uptake. The baiting approach is most effective when an active colony is present, as foragers actively collect and distribute the bait. For properties without confirmed activity, InnoTermite™ stations can be deployed in preventive configuration, providing early detection and immediate response capability if a colony later establishes.
Start the InnoTermite™
Programme Today
Whether you have seen mud tubes, damaged timber or just want to protect a high-value property, an InnoScan™ thermal inspection is the right starting point. Our NEA-licensed technician will assess your property and recommend the appropriate InnoTermite™ programme configuration.
